https://berkshire.com/about-us/quality-assurance/quality-processes/
Wiper Test Methods
Berkshire tests wiper properties identified by contamination control professionals as most critical. The test methods we employ are vital to product development and quality assurance. All test methods are based on the Institute of Environmental Sciences and Technology (IEST) standard, IEST-RP-CC004.3: Evaluating Wiping Materials Used in Cleanrooms and Other Controlled Environments.
The following are brief descriptions of Berkshire’s Wiper Tests:
Cleanliness
Fibers
A wiper is “washed” in water using a biaxial shaker for five minutes. The fibers released into the water are filtered onto a membrane and counted microscopically. The results are expressed as fibers ≥ 100µm per square centimeter of wiper. [IEST-RP.CC004.3, Section 6.2.2.2]
Particle Generation / Biaxial Shake Test / Orbital Shake Test
A wiper is “washed” in water using a biaxial/orbital shaker for five minutes. A liquid-borne particle counter then tallies the particles released into the water. By dividing the total number of particles released by the area of the wiper, the results are expressed as particles ≥ 0.5µm per square centimeter of wiper. [IEST-RP.CC004.3, Section 6.1.3 / IEST-RP-CC004.3, Section 6.14]
Airborne Particle / Helmke Drum Test
Under controlled conditions, ten wipers are tumbled in a rotating drum to release particles from the wiper fabric. An airborne particle counter counts released particles and results are expressed as the number of particles per wiper per cubic foot of air sampled. [IEST-RP-CC003.4 Section B2.5]
Sorbency
Capacity
A sample of wiper material is saturated with as much fluid as it can hold. After one minute, the material is weighed, and results are expressed in milliliters of fluid per square meter. [IEST-RP.CC004.3, Section 8.1 (Modified)]
Efficiency
This calculation indicates how well a material absorbs, relative to others. Results, expressed in milliliters of liquid per gram of material, assisting in comparing one raw material with another. [IEST-RP. CC004.3. Section 8.1 (Modified)]
Rate
This test is a measurement of the time it takes a wiper to absorb half the total liquid it can hold. Results are expressed in seconds. [IEST-RP. CC004.3. Section 8.2 (Modified)]
Purity
Non-Volatile Residue
Berkshire generates non-volatile residue data using both deionized water and 2-Propanol. Results are expressed in grams of extractables per square meter of wiper, which is a useful guide to relative purity of wipers. [IEST-RP.CC004.3, Section 7.1.2]
Metallic Ions
Ions are extracted in deionized water and quantitatively analyzed by Ion Chromatography. Results are stated in parts per million (ppm). [IEST-RP.CC004.3, Section 7.2.2]
Bond Test Methods
Berkshire tests bond paper properties identified by contamination control professionals as most critical. The test methods we employ are vital to product development and quality assurance. All test methods are based on Recommended Practices and Standards from the Institute of Environmental Sciences and Technology (IEST), the International Organisation for Standardisation (ISO) and the Technical Association of the Pulp and Paper Industry (TAPPI).
The following are brief descriptions of Berkshire’s Bond Paper Tests:
Weight And Thickness
Basis Weight
A sample of bond paper, of known size, is weighed and results expressed as grams per square meter (g/m2). [TAPPI T-410]
Caliper
The thickness of a single sheet of bond paper is measured using a digital micrometer. Results for thickness are expressed in microns (µm). [TAPPI T-411]
Cleanliness
Fibers
A sample of bond paper is “sluiced” in a tray of water for one minute. The fibers released into the water are filtered onto a membrane and counted microscopically. The results are expressed as fibers ≥ 100µm per square centimeter of bond paper. [IEST-RP.CC020.2]
Particle Generation
A sample of bond paper is “sluiced” in a tray of water for one minute. A liquid-borne particle counter tallies the particles released into the water. By dividing the total number of particles released by the area of the bond paper sample, the results are expressed as particles ≥ 0.5µm per square centimeter of bond paper. [IEST-RP.CC020.2]
Purity
Non-Volatile Residue
Berkshire generates non-volatile residue data using both deionized water and 2-Propanol. Results are expressed in grams of extractables per square meter of bond paper. [IEST-RP.CC020.2]
Metallic Ions
Ions are extracted in deionized water and quantitatively analyzed by Ion Chromatography. Results are stated in parts per million (ppm). [IEST-RP.CC020.2]
Strength
Tear
The force required to tear bond paper is tested across the width and length of the sample. Results are expressed in millinewtons (mN). [ISO 1974:2012]
Burst
The pressure required to burst bond paper is tested with results expressed in kilopascals (kPa). [ISO 2758:2014]